Reserving a Copy Job While Executing Another Copy Job
When [Reserve] is displayed on the execution screen of the current copy job, you can scan the original
of another copy job to execute after the current job is completed (Job Preset).
You can make reservations for up to eight jobs each in the Copier and Document Server functions.
1. Press [Reserve] on the execution screen of a copy job.
2.
Specify Combine, Sort, and other copy settings if necessary.
page 76 "Combining and Copying a Multi-page Original onto a Single Sheet of Paper"
page 79 "Copying in Page Order or for Each Page Number"
3. Place the original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not fed
automatically, press [Start].
4. Press [Finish Scn] after scanning all of the originals.
After the current copy job is completed, the reserved copy job starts automatically.
• If the original is large, you may not be able to make a reservation.
• To cancel the last reserved job or confirm the content of the current job, press [Job Confirmation].
• You can confirm and cancel reserved contents on the [Check Status] screen. For details, see the
following section:
• See "Deleting an Unnecessary Job from the Print Queue", User Guide (Full Version).
High Speed Copying
The vertical resolution is reduced and the print speed increased.
3. Copy
66
To Next Page
Loading...
