3. Select the paper input location, and then select a preset cut size.
When the orientations of the original and paper in the paper input location do not match, the
machine rotates the copied image automatically. To reduce an original of A2 (C) size to A3 (11 ×
17) size, for example, you can select either A3 (11 × 17) or A3 (17 × 11) .
4. Press [Original Orientation], and then specify the original orientation.
If the key is not displayed, select it from [Original Setting].
5. Place the original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not fed
automatically, press [Start].
Specifying a Combination of Original Sizes and Paper Sizes When Copying
You can specify the paper size to one where the machine automatically enlarges or reduces the image
of the original to fit when the original is placed (User Auto Reduce/Enlarge).
• When you use the paper that loaded into the paper bypass location, you cannot use the User Auto
Reduce/Enlarge function.
Making Enlarged or Reduced Copies
71
To Next Page
Loading...
