9. Press [Copy Ratio] on the Copy screen, and then press [Others].
10. Press [User Auto Red./Enlg.].
11. Press [Original Orientation], and then specify the Original Orientation.
If the key is not displayed, select it from [Original Setting].
12. Place the original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not fed
automatically, press [Start].
Correcting the Vertical and Horizontal Magnification When Copying
For environmental reasons such as humid conditions, paper may expand or shrink. This can result in a
mismatch between the size of the original and copy.
This function uses the measurements of the original and the copy to calculate a ratio to produce copies
that are close to the actual size (Fine Magnification).
Making Enlarged or Reduced Copies
73
To Next Page
Loading...
