Icon Condition Solution and reference
Paper is jammed. See the animated illustration displayed on the
control panel, and remove the jammed
paper.
See "When Paper or an Original Is Jammed",
User Guide (Full Version).
An original has jammed. See the animated illustration displayed on the
control panel, and remove the jammed
original.
See "When Paper or an Original Is Jammed",
User Guide (Full Version).
Paper has run out. Load paper into the paper input location.
page 143 "Loading Paper into the Paper
Input Location"
Ink has run out. Prepare replenishment ink. Add the
replenishment when the ink runs out.
page 188 "Adding Ink"
The ink collector unit is full. Prepare a replacement ink collector unit.
Replace the bottle when it becomes full.
page 192 "Replacing an Ink Collector Unit"
A cover is open. Check that all covers are closed.
• For the names and the contact information of consumables, check [Settings] [Inquiry]. Press
[Home] ( ) after completing the operation to close [Settings].
• See "Contact Information", User Guide (Full Version).
When the [Check Status] Indicator is lit or flashing
The [Check Status] indicator notifies the user when the machine requires immediate attention.
Flashing in red
The machine is unavailable for use. Press [Check Status] and resolve the problem as soon as
possible.
9. Troubleshooting
198
To Next Page
Loading...
Need help?
General
