When a Message Appears While Using the
Copy Function
Message Condition Solution and reference
"Cannot Detect Original
Size"
An original is not placed
correctly on the
machine.
Place the original correctly.
page 54 "Placing Originals on the Original
Table"
An original with a
difficult-to-detect size
even in the regular size,
such as a transparency
or paper with sticky
notes, is placed on the
machine.
When scanning an original with a difficult-to-
detect size, specify the paper input location in
[Paper Select]. Also, when making an
enlarged or reduced copy, select an item other
than [Auto Paper Select].
page 185 "Recommended Original Size and
Weight"
An original of a custom
size is placed on the
machine.
When scanning an original of a custom size,
specify the original size in [Original Setting]
[Original Size] [Custom Size].
"Cannot XXX paper of
this size."
"XXX is not available with
this paper size."
("Rotate Sort" or the
name of specified
finishing appears in
place of XXX)
A paper size that is not
supported in Rotate Sort
or the specified finishing
type is specified.
Check the paper size supported in Rotate Sort
and the specified finishing type and load the
supported paper.
page 264 "List of Specifications"
When a Message Appears While Using the Copy Function
209
To Next Page
Loading...
