Recommended Original Size and Weight
This section describes the sizes and weights of originals that can be placed, and missing image area.
The following regular original sizes are detected automatically:
(mainly Europe and Asia)
Original size Original weight
A0 –A4
Maximum width that can be fed: 960 mm
Maximum size: Width 914 × Length 33000 mm
Minimum size: Width 210 × Length 210 mm
(including B1 JIS
*1
, B1 ISO
*2
, 625 × 880 mm , 440 × 625 mm )
64–190 g/m
2
(17–51 lb.) and
0.090–0.2 mm
thick originals
*1
JIS: Japanese Industrial Standard
*2
ISO: International Organization for Standardization
(mainly North America)
Original size Original weight
• Engineering
E (34 × 44) –A (8
1
/
2
× 11)
• Architecture
E (36 × 48) –A (9 × 12)
• Other
8
1
/
2
× 12, 8
1
/
2
× 13 , 8
1
/
2
× 14 , 11 × 14 , 11 × 15 , 12 × 14
1
/
2
, 21 × 30 , 30 × 42
Maximum width that can be fed: 37.8 inches
Maximum size: Width 36.0 × Length 1299.2 inches
Minimum size: Width 8.3 × Length 8.3 inches
64–190 g/m
2
(17–51 lb.) and
0.004–0.008
inches thick
originals
If the originals are curled, use the carrier sheet or flatten the originals so that both their leading and
trailing edges fit within the range shown below:
Recommended Original Size and Weight
185