Registering Settings as a Program
First, configure the settings to be registered on the Copy or Scanner screen, and then register them.
1. On the Home screen, press [Copy] or [Scanner].
If the icon is not displayed on the Home screen, add the icon from the application list screen.
page 41 "Adding a Frequently Used Application or Widget to the Home Screen"
2. Specify scan and output settings to be registered as a program.
3. Press [Menu] ( ).
4. Press [Set Current Settings to Program].
5. Press a program number to register the settings.
6. Enter a program name and select an icon.
7. Press [Prev. Screen] [OK].
8. Press [Place].
The selected icon is displayed on the Home screen.
Registering Frequently Used Settings as a Program
45
To Next Page
Loading...
