Specifications for Wireless LAN Board
• Note that the available channels (frequency ranges) and locations to use the wireless LAN are
subject to the regulations of the country or region where the printer is used. Be sure to use the
wireless LAN according to the applicable regulations.
Item Specifications
Transmission spec Based on IEEE 802.11a/b/g/n (wireless LAN)
Transmission rate • 2.4 GHz band: 130 Mbps (maximum)
• 5 GHz band: 300 Mbps (maximum)
Frequency range (Center
Frequency)
• 2412–2472 MHz (1–13 channels)
• 5180–5240 MHz (36, 40, 44, and 48 channels)
• 5260–5320 MHz (52, 56, 60, and 64 channels)
• 5500–5700 MHz (100, 104, 108, 112, 116, 120, 124, 128,
132, 136, and 140 channels)
Transmission mode • Infrastructure mode
• Direct Connection Mode
• Direct Connection: Group Owner Mode
• Web Image Monitor is supported.
• The transmission rates of 130 Mbps in the 2.4 GHz band is the theoretical values of the wireless
LAN specification. The actual transmission rate may be lower, depending on the operating
environment.
• Channels other than 1–11 cannot be used because of the specifications and the configuration of
the access point.
• The channel in use might differ depending on the country.
Specifications for Device Server Option
Item Specifications
Interface • Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
List of Specifications
275
To Next Page
Loading...
