• When [Film: Matte] is specified for the paper type or when [Prevent Paper Abrasion] is specified,
load the paper, and then specify the paper abrasion setting in [Settings] [System Settings]
[Machine] [Print Action/Image Quality Adjustment] [Prevent Paper Abrasion]. However, if
you specify [Film: Matte] for Paper Type, the Prevent Paper Abrasion setting is automatically
selected, and you cannot change it. For details about Prevent Paper Abrasion, see below.
• See "Machine", User Guide (Full Version).
• Do not use paper already printed on.
• Do not insert multiple sheets at one time. Doing so can result in jams and poor quality prints.
• If you are printing multiple pages, insert each additional sheet after the preceding sheet is fully
ejected from the machine.
• If you load paper that curls severely, the edge of the paper may be caught when it is fed into the
paper bypass location. Flatten the curled paper with your hands before loading the paper.
• If the edge of the roll paper is ejected from the machine, load it again after copying or printing
from the paper bypass location. For details about how to load the paper roll, see page 144
"Loading Paper Roll into the Paper Input Location".
• You can specify the types of paper you load in the paper bypass location in advance. For details,
see below.
• See "Paper Input Location/Paper Setting", User Guide (Full Version).
• When [Touch/Notification Sound] is set to [No Sound], the beeper does not sound when paper
bumps against the back of the paper bypass location. For details about [Touch/Notification
Sound], see below.
• See "Sound", User Guide (Full Version).
• When copying from the paper bypass location, see below.
• See "Using the Paper Bypass Location to Copy", User Guide (Full Version).
• When printing from a computer, See page 161 "Specifying Regular Sizes".
• Be careful that the cables in the back of the machine do not catch on the paper.
Specifying Regular Sizes
1. Press [Settings] on the Home screen.
Loading Paper into the Paper Input Location
161
To Next Page
Loading...
