8. Close the front cover.
9. Check if the settings on the screen are correct, and then press [Start Feed].
If the paper type and thickness are different from those displayed, press [Change Settings].
Select the proper items according to the paper type and thickness you want to use, and then press
[OK].
10. Make sure that the size of the paper that is loaded is displayed correctly on the [Printer]
screen.
"Ready" appears on the screen.
• Do not operate the machine while "Please wait". is displayed when the machine is turned on.
• Press the rewind button to rewind the roll of paper. Rewinding it manually may cause paper jams.
8. Adding Paper and Ink
160
To Next Page
Loading...
