2. Click [Cancel] to exit the installer.
3. Display the "Devices and Printers" screen.
Windows 10 (version 1703 or later)
1. On the [Start] menu, click [Windows System] [Control Panel].
2. Click [View devices and printers].
Windows 10 (earlier than version 1703)
1. Right-click [Start], and then click [Control Panel].
2. Click [View devices and printers].
Windows 8.1
1. On the Charm Bar, click [Set] [Control Panel].
2. Click [View devices and printers].
4. Click [Add a printer].
5. Click [The printer that I want isn't listed].
6. Select [Add a local printer or network printer with manual settings], and then click [Next].
7. Select [Standard TCP/IP Port] on [Create a new port:], and then click [Next].
8. Enter the IP address of this machine in [Host Name or IP address].
9. Clear the [Query the printer and automatically select the driver to use] check box, and
then click [Next].
Searching for the TCP/IP port starts.
10. When the "Additional port information required" screen is displayed, select [RICOH
Network Printer C model], and then click [Next].
11. Click [Have Disk...]
[Browse...] to specify the driver (INF file), and then click [OK].
The driver is stored in the [DISK1] folder in the folder that was created when unzipping the
downloaded file.
12. Select a printer driver to install, and then click [Next].
13. Enter the printer name as necessary, and then click [Next].
Printer driver installation starts.
14. Specify the printer as a shared printer as necessary, and then click [Next] [Finish].
If the Machine Cannot Be Found
The "Network Connection Error" screen is displayed.
Installing the Printer Driver for Network Connection (Windows)
89
To Next Page
Loading...
