Ricoh IM CW2200

Specifying Custom Sizes
With the printer function, you can print on a custom size paper roll. This section explains how to specify
the paper size from the control panel of the machine.
If you load a regular size paper roll, the machine detects the paper size automatically.
Specifying a custom size roll of paper
When using RP-GL/2 or RTIFF as a printer language, you can specify a custom size roll of paper
from the control panel as follows:
• [Settings]
[Printer Settings] [Emulation(EM)] [Custom Size: Paper Input Location 1] or
[Custom Size: Paper Input Location 2]
• Paper sizes that can be specified are 279–914 mm (11.0–36.0 inches) horizontally and
210-33000 mm (8.3-1299.3 inches).
When using RTIFF as a printer language, the machine can detect the size of a custom size roll of
paper by default.
1. Press [Settings] on the Home screen.
2. Press [Printer Settings] [Emulation(EM)].
3. Select the paper input location ([Custom Size: Paper Input Location 1] or [Custom
Size: Paper Input Location 2]) in which you want to load the custom size paper.
4. Press the value in the "A" or "B" field, and then enter the new value.
Specify the values within the range of numbers inside "< >", and then press [Done].
5. Press [OK].
6. After completing the configuration, press [Home] ( ).
Specifying a custom size paper for the paper bypass location
1. Press [Settings] on the Home screen.
2. Press [Paper Input Location/Paper Settings].
3. Press [Paper Size/Paper Type] [Paper Size/Paper Type].
4. Press [Paper Bypass Location].
5. Press [Paper Size: Printer].
Loading Paper into the Paper Input Location
163