Ricoh IM CW2200

Calculating the correction value
D0CWIA6007
a
504
b
500
The dimensions of the original image is "a" and the dimensions of the copied image is "b". To make
the dimensions of the copied image the same as the original image, calculate the percentage of the
correction using the following formula:
(a-b)
/
b
× 100 = correction value (%)
If the horizontal length of the original image is 504 mm (19.8 inches) and the horizontal length of
the copied image is 500 mm (19.7 inches), use the following values:
(504-500)
/
500
× 100 = 0.8%
1. Press [Copy] on the Home screen.
2. Press [Copy Ratio] on the Copy screen, and then press [Others].
D0CWPA8052
3. Press [Fine Magnification].
3. Copy
74