4. Enter the vertical and horizontal correction value, and then press [OK].
5. Place the original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not feeds
automatically, press [Start].
• Fine Magnification is used for originals that have already been scanned. If you want to apply fine
correction ratio to paper that has stretched due to the paper type or exposure to humid conditions,
specify the setting under [Fine Ratio Adjustment: Copier].
• See "Machine", User Guide (Full Version).
• If you specified the ratio in both System Settings and this function, the resulting settings will be the
sum of the specified value.
• Depending on the image patterns of the originals, moiré patterns may be noticeable, or the image
quality may deteriorate.
Making Enlarged or Reduced Copies
75
To Next Page
Loading...
