Message Cause Solution and reference
"Paper size and type
are mismatched."
"Change the setting
to continue the
current job or press
[Job Reset]."
The paper input
location loaded
with paper of the
size or type
specified in the
printer driver is not
available.
• To cancel printing, press [Cancel Printing].
• To proceed with printing on the specified paper,
load the paper and then check that the paper size
and type are correctly specified in [Settings]
[Paper Input Location/Paper Settings].
page 143 "Loading Paper into the Paper Input
Location"
"Printer font error." There is a problem
in the font file of the
machine.
Consider repairing the machine.
"Print overrun." A page image is
discarded while
printing the page.
Decrease resolution under [Others] [Special
Settings] [Image Quality] [Image Smoothing] in
the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
"Receiving data
failed."
Transmission of
data was canceled.
Send the data again.
"Sending data
failed."
Transmission of
data from the
printer driver was
canceled.
Check that the computer is operating normally.
"The selected paper
size is not
supported. This job
has been
cancelled."
A paper size that
cannot be fed on
the machine was
specified and
printing was
canceled by the
auto job cancel
function that was
activated.
Print the document on paper of a size that can be fed
on the machine.
9. Troubleshooting
218
To Next Page
Loading...
