1. On the Home screen, press [Document Server].
2. On the document server screen, select the desired folder.
• Press [Search by Folder No.] or [Search by Folder Name] to search for a folder.
• If you select a password-protected folder, enter the password, and then press [OK].
3. Select the document to print.
If the document is password protected, enter the password and press [OK].
4. Press [To Printing Screen].
5. Change the print settings.
• To print two or more copies, enter the quantity using the number keys.
• When specifying Sort or Rotate Sort, you can make a partial print as a test and proceed to
print the rest of the quantity by pressing [Sample Copy].
• Press [Back to File List] to return to the screen for selecting documents.
6. Press [Start].
• You can change the number of sets during printing. This function can be used only when the Sort
function is selected in the printing conditions. To change the quantity while printing is in progress,
press [Stop], enter the quantity, and then press [Resume Printing]. The quantity you can enter differs
depending on when you press [Stop].
• You can enlarge or reduce documents that are stored in black and white mode from the document
server function. The file format converter is required to print the stored documents by enlarging or
reducing them.
• If documents were stored from the printer driver, you cannot print them with the Stamp, Reduce/
Enlarge, Adjust Print Position, or Rotate Sort functions.
Printing Documents in Document Server
135
To Next Page
Loading...
