Ricoh IM CW2200

Message Cause Solution and reference
"CM: The job was
cancelled because of a
timeout error with PS3/
PDF."
A timeout error occurred in
PostScript 3 or PDF printing,
so printing was canceled by
the auto job cancel function.
• Check that the machine can
communicate properly with the PC.
• PostScript 3
Check the following setting items.
When [Use Machine Setting(s)] is
selected, set the waiting time longer.
When [Use Driver/Command] is
selected, set the waiting time specified
by the command longer.
Check the setting of [Settings]
[Printer Settings] [PS Menu]
[Job Timeout].
"CN: The job was
cancelled because the
print settings specified by
PS3 are not consistent
with the machine
settings."
Some of [Printer Settings] on
the print data did not match
the machine settings, so
printing was canceled by
the auto job cancel function.
Check that the printer settings specified in
the print data match the settings in
[Settings] [Printer Settings] [PS
Menu].
"CO: The job was
cancelled because of a
font error with PS3/
PDF."
A font error occurred in
PostScript 3 or PDF printing,
so printing was canceled by
the auto job cancel function.
Register the required fonts.
"CP: The job was
cancelled because of
insufficient memory error
with PS3/PDF."
An insufficient memory error
occurred in PostScript 3 or
PDF printing, so printing was
canceled by the auto job
cancel function.
Consider repairing the machine.
"EC: The job was
cancelled because of a
failure to store and skip
an error job."
A document has been set to
be stored or canceled when
an error occurs and it did
not operate, so printing was
canceled by the auto job
cancel function.
• Fix the error that occurred.
• You can check the settings of the
operation when an error occurs in
[Settings] [Printer Settings]
[System] [Error Action] [Store
and Skip Errored Job].
When a Message Appears While Using the Printer Function
221