Ricoh IM CW2200

Message Cause Solution and reference
"Authentication has
failed."
B/W/L0103-000
An operation in the
TWAIN supporting
application was
performed from the
computer while a user
was logged in to the
machine or performing
the login procedure.
Check whether another user is logged in to the
machine, and then perform the operation.
"Authentication has
failed."
B/W/L0104-000
An incorrect password
was entered.
Enter the correct password.
The Driver Encryption
Key is not registered
correctly in the TWAIN
driver.
Consult the network administrator whether the
Driver Encryption Key is required, and
configure the driver accordingly.
See "Specifying Login Information in the Printer
Driver", User Guide (Full Version).
The network administrator can check the
setting of "Driver Encryption Key: Encryption
Strength" in [Settings] [System Settings]
[Settings for Administrator] [Security]
[Extended Security Settings].
"Authentication has
failed."
B/W/L0206-002
An incorrect login user
name or password was
entered.
Enter the correct login user name and
password.
A user has attempted to
log in to the functions
that can be accessed
only by the
administrator such as
[Settings] when
[Application
Authentication
Management] is
specified.
The user needs to log in from the application
login screen.
"Authentication has
failed."
B/W/L0206-003
":" or another character
that cannot be used in a
login user name was
entered.
• Enter the correct login user name.
• Change the user name if it contains a
space, ":" or other unusable characters.
When Other Messages Appear
237