• Selecting [100.0%] for [Scan Ratio] under [Send Settings]
• Selecting [200 dpi], [300 dpi], [400 dpi], or [600 dpi] for [Resolution] under [Send Settings]
• Selecting other than [Preview]
• Specifying [PDF File Type: PDF/A Fixed] under [Settings] [System Settings] [Settings for
Administrator] [File Management] to [Off]
Scan to Folder
Item Specifications
Scanning resolution 150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi
Protocol SMB, FTP
Output format TIFF, JPEG, PDF, PDF (JPEG 2000), PDF/A, Searchable PDF
*1*2
Operating system • Windows 8.1/10
• Windows Server 2012/2012 R2/2016/2019
• macOS 10.14 - 11
*1
To perform OCR, the optional OCR unit is required.
*2
The number of characters that can be scanned optically is about 40,000 characters per page.
• When you select [PDF], [PDF (JPEG 2000)], or [PDF/A] for the file format, you can attach a digital
signature. You can also specify the security settings for [PDF] or [PDF (JPEG 2000)].
• See "Scanning an Original as a PDF with Security Settings Specified", User Guide (Full Version).
• To specify PDF (JPEG 2000) for the PDF type, the following settings are required:
• Selecting Gray Scale or Full Color for [Original Type] under [Send Settings]
• Selecting [100.0%] for [Scan Ratio] under [Send Settings]
• Selecting [200 dpi], [300 dpi], [400 dpi], or [600 dpi] for [Resolution] under [Send Settings]
• Selecting other than [Preview]
• Specifying [PDF File Type: PDF/A Fixed] under [Settings] [System Settings] [Settings for
Administrator] [File Management] to [Off]
Network TWAIN Scanner
Item Specifications
Scanning resolution 100–1,200 dpi
*1
Protocol TCP/IP
List of Specifications
273
To Next Page
Loading...
