• You cannot specify Synchro Cut together with Stamp function.
• You can copy with a margin when Synchro Cut is specified.
• See "Copying with Margins", User Guide (Full Version).
• Depending on the original length and paper type, copy paper length may be different
from the original.
Preset Cut
Cuts the paper at a preset size, regardless of the size of the original. You can use this to copy
different sized originals to the same size.
1. Press [Copy] on the Home screen.
2. Press the paper input select key, and then select Paper Input Location 1 or 2.
3. Select a preset cut size.
4. Place the original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not fed
automatically, press [Start].
• The preset cut size differs depending on the paper roll width. It is cut in the following sizes.
• (mainly Europe and Asia)
Basic Procedure for Copying Documents
61
To Next Page
Loading...
