If the key is not displayed, select it from [Combine].
3. Specify the original orientation and number of pages to combine on one side of a sheet.
4. Press [OK].
5. Press the paper input location select key, and then select the paper input location and a
preset cut size.
6. Press [Original Orientation], and then specify the original orientation.
If the key is not displayed, select it from [Original Setting].
7. Place an original.
page 57 "Basic Procedure for Copying Documents"
The original is fed into the machine automatically, and copying starts. If the original is not fed
automatically, press [Start].
Press [Finish Scn] after scanning all of the originals if necessary according to the number of
originals.
• The minimum copy ratio in the Combine function is 25%. For example, if you combine 4 pages of
A2 (C) size original onto A3 (11 × 17) size paper, the copy ratio becomes less than 25% and
parts of the image might not be copied.
• You can configure the following settings in [Settings] [Copier / Document Server Settings]
[Combine]:
• [Copy Order in Combine]: The order of combined images
• [Separation Line in Combine]: The separation line between combined pages
See "Combine", User Guide (Full Version).
Combining and Copying a Multi-page Original onto a Single Sheet of Paper
77
To Next Page
Loading...
