4. Click [Options], select the option installed on the machine, and then click [OK].
• If the usable options are not displayed, the IP address has not been entered correctly or the
PPD file has not been registered properly. To enter the IP address or register the PPD file, see
page 94 "Registering the Machine in [Printers & Scanners]".
5. Close the system preferences screen.
• If the option you want to select is not displayed, PPD files may not be set up correctly. To complete
the setup, check the name of the PPD file displayed in the dialog box.
• Setting procedures using macOS 11.2 are shown as an example. The actual procedure may differ
depending on the OS version you are using.
Installing the Printer Driver for Network Connection (macOS)
97
To Next Page
Loading...
