USING SERVICE PROGRAM MODES 20 February, 2001
5-20
5
Mode Number/Name Function/[Setting]
Program Download827
Downloads the system program from a flash memory card
to the flash memory on the BICU board.
[0 = No / 1 = Yes]
This SP can be used when a flash memory card has been
plugged into the machine’s card slot.
☛
5.1.9 Program Upload/Download
Printer Free Run901
Performs a printer free run.
[0 = No / 1 = Yes]
After selecting “1”, press OK or ' twice to start the run.
Press % to stop.
Test Pattern Print902
Prints a test pattern
Press & to enter copy-mode display, then print out the
pattern.
☛
5.1.2 Test Pattern Printing
Exhaust-Fan Control Timer906*
Inputs the fan control time.
[30 ~ 120 / 30 / 1 s/step]
The fan maintains normal speed for the specified time
after occurrence of an SC or following entry into Warm-up
mode, Low Power mode, or Night/Off mode.
Plug & Play Setting907*
Selects the brand name and production name for the Plug
and Play function (for Windows 95 and up). These names
are registered in the NVRAM. If the NVRAM becomes
defective, these names should be re-registered.
• Use the Right or Left cursor key to scroll through the list
of brand names. To select a brand name, press the
Original Type key and the OK (or ') key at the same
time. The LCD displays an asterisk (*) next to the
number of the currently selected brand name.
• After displaying any of the brand names, you can view
the corresponding production name by pressing the
Darker key. (If the production name is longer than 43
characters, hold down both the Darker and Lighter keys
together to view the rest of the name).
Fax Download/Upload
1 Program download Download the fax system program from a flash memory
card to the flash memory on the FCU board.
☛
Fax Service Manual
2 SRAM data download Download fax setting data from a flash memory card to
the SRAM on the FCU board.
☛
Fax Service Manual
908
3 SRAM data upload
Download fax setting data from the SRAM on the FCU to
a flash memory card.
☛
Fax Service Manual
To Next Page
Loading...
