Ricoh LCIT RT5100 - Vertical Feed Unit

Vertical Feed Unit
• Do not pull out all the trays in the vacuum Feed LCIT RT510 (when not linked to the main unit)
because it could fall over.
Vertical Feed Unit
1. Upper inner cover (page 13 "Upper Inner Cover")
2. Lower inner cover (page 15 "Lower Inner Cover")
3. Remove the rear right and left covers (page 8 "Rear Right Cover", page 8 "Rear Left Cover").
4. Remove each vertical transport unit cooling fan bracket. (xref Vertical Transport Unit Cooling Fan)
5. Vertical transport exit motor bracket (page 72 "Vertical Transport Exit Motor")
6. Tray 2 vertical transport motor 2 bracket (page 68 "Tray 2 Vertical Transport Motor 2")
7. Disconnect all the harnesses that connected to the vertical feed unit ( x all, x all).
Vertical Feed Unit
59