Printing Files Directly from Windows
75
9
Cycle Setting
Select the cycle setting mode of master making and print.
command=value of cycle setting
The following example shows the command for auto cycle: (host name: nphost,
file name: file1):
•rcp
% rcp file1 nphost:command=intprint_off
•ftp
ftp> put file1 command=intprint_off
Ink Saver
Select whether or not to print with the normal amount of ink.
command=value of ink saver
The following example shows the command for printing with “level 1” ink sav-
ing: (host name: nphost, file name: file1):
•rcp
% rcp file1 nphost:command=inksaver_lv1
•ftp
ftp> put file1 command=inksaver_lv1
Cycle Setting Value
Auto Cycle intprint_off
Original Page Cycle intprint_afterprint
Master Cycle intprint_aftermastermaking
Master/Print Cycle intprint_all
Settings are not specified intprint_none
Ink saver Value
Prints with the normal amount of ink. inksaver_off
Prints with “level 1” ink saving. inksaver_lv1
Prints with “level 2” ink saving. inksaver_lv2
Settings are not specified. inksaver_none
To Next Page
Loading...
