Printing Files Directly from Windows
77
9
The following example shows the command for selecting “skipfeed_2” printing:
(host name: nphost, file name: file1):
•rcp
% rcp file1 nphost:command=skipfeed_2
•ftp
ftp> put file1 command=skipfeed_2
Classify
Select whether or not to classify different print jobs and copies.
command=value of classify
The following example shows the classification command: (host name: nphost,
file name: file1):
•rcp
% rcp file1 nphost:command=classify_on
•ftp
ftp> put file1 command=classify_on
Master Cut
If the size of the print image is half the maximum master size, select whether or
not to make the master only for the size of the print image.
command=value of master cut
The following example shows the command for making the master only for the
size of the print image: (host name: nphost, file name: file1):
•rcp
% rcp file1 nphost:command=mastercut_on
•ftp
ftp> put file1 command=mastercut_on
Classify Value
Classification is performed. classify_on
Classification is not performed. classify_off
Settings are not specified. classify_none
Master cut Value
Master is made only for the size of the print
image.
mastercut_on
Master is made for the whole drum surface, re-
gardless of the size of the print image.
mastercut_off
Settings are not specified. mastercut_none
To Next Page
Loading...
