8. Confirm a message on the control panel, and then open the right cover.
9. Pour the included cleaning liquid into all caps.
Fill the caps up with the cleaning liquid by using a dropper.
10. Raise the lock lever located inside of the right cover on the left, and then close the right
cover.
11. Press [Confirm].
The carriage moves to the home position and nozzle maintenance is performed. Performs nozzle
maintenance for the period that is set in [Nozzle Immersion Time]. When maintenance is
completed, a message appears.
12. Press [Confirm].
13. Press [Close].
14. Press [End].
15. Print nozzle check pattern.
For details about test printing, see page 85 "Test Printing".
Performing ink refreshing
Performing ink refreshing discharges ink in the ink supply route.
When You Cannot Print as Expected
187
To Next Page
Loading...
