2. Printing RICOH Ri 2000 User Manual
107
2.6. Printing your image
You can start printing after setting the garment, adjusting the platen height, and selecting the print image.
IMPORTANT! If you change the type of garment to be printed since the last time you adjusted the
height, be sure to adjust the height again.
Note - If the [PRINT START] button is not available to press, you need to perform the height adjustment
of the platen. see page 99, "Adjusting the Height of the Platen", to perform height adjustment.
The status bar shows "Ready" in the upper left-hand corner. If the status bar shows anything else
such as maintenance or ink error etc., you are not able to print.
Check that the garment is properly flat.
Specify the number of prints.
To Next Page
Loading...
