Ricoh Ri 2000 - White Polyester Printing Workflow

2. Printing RICOH Ri 2000 User Manual
112
2.8. Printing Flow (For White Polyester)
The basic printing process when printing on polyester garments is as follows.
Please note that white ink is not compatible with polyester garments. Please prepare white polyester
garments.
Adjust the image or printer settings as necessary.
When printing on white polyester garments,
pre-treat the garments.
See page 114, “Pre-treatment of White
Polyester Garments
”.
Prepare the print image.
See the ColorGATE Productionserver
manual.
Flatten the garment using a heat press.
See page 116, “Flatten the garment by
using a heat press
”.
Set the garment on the platen.
See page 96, “Setting the Garment onto the
Platen”.
Perform HEIGHT ADJUST.
See page 99, “Adjusting the Height of the
Platen”.
Send the image to the machine.
See page 102, “Sending the Print Image”.
Print the garment.
See page 107, “Printing your image”.
Fix the ink with heat treatment.
See page 117, “Set the Image with Heat
Treatment (For White Polyester)
”.