Ricoh Ri 2000 - Printer Table Alignment Procedure

4. Adjustments RICOH Ri 2000 User Manual
178
4.2. Adjusting the Table
The printing indexing of the table can be adjusted. Typically, you do not need to do this unless a
component is replaced such as the sub control board or the CTL board.
If the print result shows horizontal lines and the nozzle check is perfect (no missing nozzles and no nozzle
deflection and the table height is correct), you need to do this function.
 Things to prepare
Purpose
Items
For use
Transparent A4 media
Press [TABLE ALIGNMENT].
Press [YES].