2. Printing RICOH Ri 2000 User Manual
116
2.10. Setting the Garment (For White Polyester)
Flatten the garment by using a heat press
Read the heat press manual carefully and use the press according to the safety precautions.
Otherwise, injury or burns could result.
Use a heat press to lay flat wrinkles and fluff on the garment before setting it on the platen.
Set the new white polyester garment onto the heat press.
Close the heat press and press the white polyester garment on the heat press for
about 10 seconds.
Press down at the set temperature of the printing media.
White polyester garment (use white and color ink to print): 330˚F or 165˚C.
Open the top of the heat press, and then remove the garment softly.
To Next Page
Loading...
