2. Printing RICOH Ri 2000 User Manual
99
2.4. Adjusting the Height of the Platen
This machine adjusts the height of the platen automatically.
The height adjustment of the platen must be performed before printing a garment.
The adjustment result will be reset 2 hours after the last print.
Once height adjustment of the platen is performed, you can print without height adjustment until the height
adjustment result is reset.
Flatten the clothes set onto the platen as much as possible.
Press [HEIGHT ADJUST].
Next step differs depending on “OPTIONAL PLATEN” setting.
For details, see page 47, "[HEIGHT SETTING]" in “Settings Tab”.
To Next Page
Loading...
