Ricoh Ri 2000 - Status

1. Before You Begin RICOH Ri 2000 User Manual
44
9. [STOP]
Stops any current movement of the platen and allows you to cancel the print job.
10. [HEIGHT ADJUST]
Starts the height adjustment of the platen.
11. Function Tabs
Switches the menu displayed on the touch screen.
Status
1. Status details
Displays the printer status in detail and shows any warnings or errors.
2. Ink status
Displays the current ink percentage levels in each installed cartridge. Each ink appears as their
respective colors. Cleaner cartridges are displayed as clear. If no cartridge is installed, X and NC
appear.
3. Waste ink bottle status
Displays the status and fill percentage of the waste ink bottle.
4. [WASTE INK RESET]
Reset the counts of the waste ink bottle. Press [WASTE INK RESET] to reset the percentage back to
0% after the waste ink bottle is manually drained/emptied.
IMPORTANT! Resetting the waste ink without actually emptying the waste ink bottle can result in
the ink overflowing from the waste ink bottle. Also, if the waste ink bottle is full
(100%), the machine will be in an error state, and auto maintenance will not be
performed. This could cause damage to the machine.
1
2
3
4