2. Printing RICOH Ri 2000 User Manual
95
2.3. Setting the Garment (For Cotton Garments)
Flatten the garment by using a heat press
Read the heat press manual carefully and use the press according to the safety precautions.
Otherwise, injury or burns could result.
Use a heat press to lay flat wrinkles and fluff on the garment before setting it on the platen.
Set the new garment onto the heat press.
Close the heat press and press the garment on the heat press for about 10
seconds.
Press down at the set temperature of the printing media.
For example: White T-shirt (use color ink to print): 356˚F or 180˚C
Dark-color (black) T-shirt (use white and color ink to print): 330˚F or 165°C
Open the top of the heat press, and then remove the garment softly.
To Next Page
Loading...
