2. Printing RICOH Ri 2000 User Manual
94
• When first attempting the pre-treatment process test with a few shirts to determine how much to
spray. Too much pre-treatment can leave dark areas on the garments. Too little pre-treatment can
make the prints look dull. The performance of white ink is highly dependent on the proper
application of pre-treatmen.
The following image is shown to be muddled, gray, and not as solid as the nose of the leopard
(green arrow).
NOTE: Contact your sales representative for the usage method when using other pre-treatment agents.
Poor pre-treatment can be seen
on the left side.
To Next Page
Loading...
