9. Troubleshooting Guide RICOH Ri 2000 User Manual
234
<If you have no plans to use the machine in the near future>
Follow the panel display and remove the platen from the machine, then press the "OK" button.
After pressing the "OK" button, one of the following panels will be displayed. (If there are print jobs
remaining on the machine, the panel on the right will be displayed.)
This is a message to reconfirm that you have removed the platen. If you have removed the platen, please
press the "OK" button. (If there is a print job remaining on the machine, pressing the "OK" button cancel
the print job.) After pressing the "OK" button, the table will move towards the center of the machine. be
careful.
*If you press "CANCEL" here, the message will be canceled and you will return to the normal screen.
To Next Page
Loading...
