1. Before You Begin RICOH Ri 2000 User Manual
31
Hold down the sub power button for more than 2 seconds.
orth American model
/Pacific models
After booting, the printer will perform initial ink charging if the ink is not charged.
Initial ink charging performs both white and color at the same time, and it takes about 20 minutes.
NOTE – During the initial ink charging, do not lift the front cover. Also, do not pull out the ink
cartridge. During initial ink charging, if it is paused by lifting the front cover, hold down the
sub power button to reboot printer.
Once the initial ink charge is completed, the printer shows "Ready" in the upper left-hand corner
of the touch screen.
To Next Page
Loading...
