1. Before You Begin RICOH Ri 2000 User Manual
48
[STORED JOB]
If selected, jobs in internal memory will be deleted after a selected
# of days, the default is this is tuned off so jobs are not deleted.
[FACTORY RESET] Set Head. Table and print alignment to original settings.
[VOLUME] Set volume of buzzer
[AGITATE SETTING] Select display format when agitating white cartridges.
[USB UPDATE] Update firmware using USB drive.
If run it, you need to save latest firmware to USB drive in advance.
For details, see “How to update” included in the updater files.
[OPTIONAL PLATEN] Select whether you are using standard platen or option platen.
If you want to use option platen, please do a valid.
3. [INFORMATION]
Displays the general information of the printer such as Serial #, Control panel firmware version,
Engine (CTL) firmware version, and Sub control board firmware version.
To Next Page
Loading...
