Ricoh Ri 2000 - Page 80

1. Before You Begin RICOH Ri 2000 User Manual
80
Set the Limit value.
Recommended value：60
If Dark-Garment is selected for the media, lower the value in the Minimum field from the default of 60
to 30.
However, the optimum value depends on the type of T-shirt, so adjust the value if necessary.
Click [OK].
NOTE –
・This setting will increase the consumption of white ink.
・If ink bleeding occurs, set the drying time with of the printer. (see page 47, "[DRYING TIME]" in
Settings Tab)
・When returning the white print mode to [600x1200 4pass BiDir 2bit], also return the Limit value to
the original value.