Ricoh SG K3100DN User Manual

• [Confirm SMTP Auth. Password]
Enter the password using up to 63 characters.
Default: Blank
• [SMTP Auth. Encryption]
If you select [Auto Select], the printer logs on using DIGEST MD5, CRAM MD5, NTLM
Authentication, LOGIN, and then PLAIN.
If you select [On], the printer logs on using DIGEST MD5, CRAM MD5, and then NTLM
Authentication.
If you select [Off], the printer logs on using LOGIN and then PLAIN.
Default: [Auto Select]
[POP before SMTP]
By specifying the SMTP authentication setting, you can send e-mails to destinations where the e-
mail server carries out SMTP authentication.
By using POP before SMTP, you can log on to an SMTP server supporting POP before SMTP.
You can specify whether to use POP before SMTP, and specify the POP server name, POP port
number, POP user name, and POP password.
• [POP before SMTP]
You can specify whether to enable or disable this function.
Default: [Inactive]
• [POP User Name]
Enter a user name using up to 127 characters.
Default: Blank
• [POP Password]
Enter a password using up to 63 characters.
Default: Blank
• [Confirm POP Password]
Enter a password using up to 63 characters.
Default: Blank
• [POP Auth. Encryption]
If you select [Auto Select], the printer logs on by APOP login, and then in plain text.
If you select [On], the printer logs on only by APOP login.
If you select [Off], the printer logs on only in plain text.
Default: [Auto Select]
• [Timeout setting after POP Auth.]
Using Web Image Monitor
171

Ricoh SG K3100DN Specifications

General

Brand	Ricoh
Model	SG K3100DN
Category	Printer
Language	English