PERFORMER Digital Partyline, User Manual, Version 2.30
4.3.8 DIP Switch CD-2
SW OFF ON
1 Auto momentary Momentary changeover / latched for TALK A.
In the ‘Off’ position, a short push on TALK A will
switch the microphone signal on channel A ON, a
second push switches it OFF again.
A longer push in OFF mode will be regarded as
momentary.
SW-1 in ON mode, TALK A is only active as long
as the button is pressed.
2 Auto momentary Momentary changeover / latched for TALK B.
3 M/Kill
enabled
M/Kill
disabled
Disables the M/Kill function of the unit
4 Talk &
listen
B listen only TALK B is disabled
5 Dynamic Electret Microphone type headset
6 AUX disabled AUX enabled AUX IN / OUT routed to digital party line channel
A
7 AUX disabled AUX enabled AUX IN / OUT routed to digital party line channel
B
8 GPI out by
CALL
GPI out by GPI The GPI out relay is triggered either by CALL or
GPI, depending on the SW setting.
Page 30
To Next Page
Loading...
