Rigol DP1116A - Page 33

Chapter 2 Front Panel Reference RIGOL
User’s Guide for DP1116A
2-7
Figure 2-6 Current setting
6. Turn on the output: press On/Off (the letter below this key “On” is highlighted)
and the instrument will work under CV mode.
NOTE
In CV mode, if the output current exceeds the specified value because of the
change of the load connected to, the instrument will switch into CC mode according
to the present current value and reduce the output voltage proportionally. You can
increase the setting value of the current at this moment in order to resume the CV
output.