Rigol DS4024 - Page 28

RIGOL Contents
XXVI MSO4000/DS4000 User’s Guide
CAN Decoding (Option) ......................................................................... 8-26
FlexRay Decoding (Option) .................................................................... 8-31
Chapter 9 Reference Waveform ......................................................... 9-1
To Turn the Reference Waveform Channel On/Off ...................................... 9-2
To Select the Current Reference Waveform Channel .................................. 9-3
To Set the Reference Waveform Color ...................................................... 9-3
To Select the Reference Waveform Source Channel ................................... 9-4
To Save and Display the Reference Waveform ........................................... 9-4
To Adjust the Reference Waveform Display ............................................... 9-5
To Export the Reference Waveform File .................................................... 9-5
To Import from the Reference Waveform File ............................................ 9-6
Chapter 10 Pass/Fail Test ............................................................ 10-1
To Enable or Disable the Pass/Fail Test Function ...................................... 10-2
To Start or Stop the Pass/Fail Test Operation ........................................... 10-2
To Specify the Source ........................................................................... 10-3
To Set the Test Mask ............................................................................ 10-3
Screen Region Mode ...................................................................... 10-4
Cursor Region Mode ....................................................................... 10-5
To Turn the Test Result Display On/Off ................................................... 10-7
To Set the Output Form of Test Failure ................................................... 10-7
To Save the Test Mask Range ................................................................ 10-9
To Load the Test Mask Range ................................................................ 10-9
Chapter 11 Waveform Recording ................................................. 11-1
To Record Waveform Using the “Record” Mode ....................................... 11-2
To Record Waveform Using the “Open” Mode .......................................... 11-6
To Play Back the Waveform Recorded ..................................................... 11-7
Manual Playback ............................................................................ 11-7
Auto Playback ............................................................................... 11-8
To Analyze the Recorded Waveform ..................................................... 11-12
To Set the Template (Trace Mode) ................................................. 11-17
To Create the Pass/Fail Test Mask (Pass/Fail Test Mode) .................. 11-19
Chapter 12 Display Control .......................................................... 12-1
To Specify the Display Type ................................................................... 12-2
To Set the Persistence Time .................................................................. 12-3
To Set the Waveform Brightness ............................................................ 12-5
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30