Rigol DS4024 - To Rename a File or Folder; To Clear the Local Memory

RIGOL Chapter 13 Store and Recall
13-18 MSO4000/DS4000 User’s Guide
To Rename a File or Folder
The rename operation is valid only in external storage mode. Before performing the
operation, make sure that a USB storage device is connected correctly.
1. Press Storage  Disk.Manage; turn the multi-function knob to select the
external disk (“Disk D” or “Disk E”) and press the knob to open the external disk.
2. Select the desired file or folder to be renamed by referring to “To Delete a File
or Folder”.
3. Press Rename to open the file/filename interface. Please finish the rename
operation by referring to “
English Input Method” and “Chinese Input
Method”.
To Clear the Local Memory
MSO4000/DS4000 allows you to clear all the files stored in the local memory.
1. Press Storage  Disk.Manage and turn the multi-function knob to select
the local disk (“Local Disk”).
Note: After selecting the local disk (“Local Disk”), do not press the
multi-function knob ; otherwise, Security Clear will be grayed out and
disabled.
2. Press the page up/down key at the right of the screen to open the next menu
page; press Security Clear  OK to delete all the files stored in the local
memory.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30