RIGOL Chapter 14 System Function Setting
14-12 MSO4000/DS4000 User’s Guide
Error Information
The failure that might occur includes the temperature of the mainboard is too high,
the fan stops rotating, etc. If failure occurs, users need to return the instruments
back to our factory for repair. At most 16 error messages lately appeared can be
viewed. The error information is stored in the volatile memory and will be cleared
automatically after power-off.
If there are error messages in the oscilloscope currently, an exclamation mark is
displayed in the status bar at the lower-right corner of the screen; at this point, you
can press Utility System ErrorInfo to view the error messages. If the
oscilloscope works normally, ErrorInfo is grayed out and disabled.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30
To Next Page
Loading...
