RIGOL Chapter 13 Store and Recall
13-16 MSO4000/DS4000 User’s Guide
3. Input the first Chinese character “文”
1) Input the pinyin “wen” in the “Pinyin Input Area”
Press Keyboard to select the “Keyboard” area, turn the multi-function
knob
to select the first letter “w” (or “W”) in the pinyin “wen” and press
the knob to input “w” in the “Pinyin Input Area”.
Use the same method to input the remaining letters “en” in the pinyin “wen”.
After finishing the input, the Chinese characters available are displayed in
the “Chinese Character Selecting Area”.
2) Select the desired Chinese character in the “Chinese Character Selecting
Area”
Press Chinese to select the “Chinese Character Selecting Area”, turn the
multi-function knob
to select “文” and press the knob to input “文” in
the “Name Input Area”.
4. Input the other chracters
Use the same method to input the remaining Chinese characters “件名” by
referring to step 3.
5. Modify or delete the chracters input
When inputting the name, you can modify or delete the filename characters
input in the “Name Input Area” as well as delete the pinyin characters input in
the “Pinyin Input Area”.
1) Modify or delete the filename characters input in the “Name Input Area”
Press Name to select the “Name Input Area” and turn the multi-function
knob
to select the character to be modified or deleted; input the
desired character by referring to step 3 or press Delete to delete the
character.
2) Delete the pinyin characters input in the “Pinyin Input Area”
Press Keyboard to select the “Keyboard” area and press Delete
continuously to delete the pinyin characters input in the “Pinyin Input Area”
in order.
6. After finishing the input, press OK and the oscilloscope will create a folder or a
specified type of file with this name under the current directory.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30
To Next Page
Loading...
Need help?
General
