5.6 ETH.NET: Ethernet Menu
Items within this group set the Ethernet and IP parameters.
Items Name Description
DHCP enable DHCP Set whether IP setup is obtained via DHCP. Options are:
OFF
ON (default)
IP address IP View or set the IP address. Displayed as nnn.nnn.nnn.nnn
(eg 192.168.1.254). Each octet has the range of 0 to 255.
Read only when DHCP is enabled, displays the DHCP assigned
address. Default is 192.168.1.254.
Subnet mask MASK View or set the subnet mask. Displayed as nnn.nnn.nnn.nnn
(eg 255.255.255.000). Each octet has the range of 0 to 255.
Read only when DHCP is enabled, displays the DHCP assigned
mask. Default is 255.255.255.0.
Gateway address GATE.W View or set the default gateway address. Displayed as nnn.
nnn.nnn.nnn (eg 192.168.1.1). Each octet has the range of 0
to 255. Read only when DHCP is enabled, displays the DHCP
assigned address. Default is 192.168.1.1.
DNS servers DNS.1, DNS.2, DNS.3 View or set the DNS server addresses. Displayed as nnn.nnn.
nnn.nnn (eg 192.168.1.1). Each octet has the range of 0 to
255. Read only when DHCP is enabled, displays the DHCP as-
signed address. Defaults are 192.168.1.1, 0.0.0.0, 0.0.0.0.
Host name HST.NAM The indicator hostname. Defaults to <model>-<serial no>,
e.g. c520-123456.
Search domain SEARCH Search domain used in addition to domain name. Read only
when DHCP is enabled, displays the DHCP assigned search
domain. Default is “”.
MAC address MAC Ethernet MAC address in hexadecimal. Read only.
27 C500-600-2.0.3
To Next Page
Loading...
Need help?
General
