26.2 Upgrading Firmware via the Web Interface
26.2.1 Accessing the Web Interface
Follow the instructions below to access the web interface.
1. Connect the indicator to the network and power up
2. Use the OPER:IP.INFO (Section 6) or ETH.NET (Section 5.6) menus, or Viewer device finder to deter-
mine the IP address of the indicator:
3. Open the IP address in your web brower (clicking the http:// button in the Viewer will do this), otherwise
enter it manually in the browser:
170 C500-600-2.0.3
To Next Page
Loading...
