17.8 Thumbwheel IO selection of printer text line
This allows a thumbwheel connected to several IO to select one of nine text strings to be printed via the print
token 152 (see Section 9.4). The text to be printed can be set using the TXT command (see Section 21.3.52).
All IOs configured for thumbwheel are combined together to select the string from lowest IO giving the least
significant bit to highest IO giving the most significant bit.
17.9 Unit switch
This function will switch between the available units.
17.10 Setpoint reset inputs
This allows a setpoint to be disabled by an input.
71 C500-600-2.0.3
To Next Page
Loading...
Need help?
General
