Rion VA-12 User Manual

143
Setting Commands
Low-pass  lter setting command
Low
Pass Filter, p1
Parameter Content
p1 = “1kHz” 1 kHz
p1 = “5kHz” 5 kHz
p1 = “20kHz” 20 kHz
Input range setting command
Level
Range, p1
Parameter Content
p1 = “0” to “6” An actual value is different according
to the setting.
0 is the lowest range setting, then
1, 2, etc.
Frequency span setting command
Frequency
Span, p1
Parameter Content
p1 = “100Hz” 100 Hz
p1 = “200Hz” 200 Hz
p1 = “500Hz” 500 Hz
p1 = “1kHz” 1 kHz
p1 = “2kHz” 2 kHz
p1 = “5kHz” 5 kHz
p1 = “10kHz” 10 kHz
p1 = “20kHz” 20 kHz
Number of analysis lines setting command
Analysis
Line, p1
Parameter Content
p1 = “200” 200 lines
p1 = “400” 400 lines
p1 = “800” 800 lines
p1 = “1600” 1600 lines
p1 = “3200” 3200 lines

Rion VA-12 Specifications

General

Brand	Rion
Model	VA-12
Category	Measuring Instruments
Language	English